The drive will operate in all axes (6 directions). The drive will operate
within the specified error rates when tilted +/-5 degrees from these positions. Performance and error rate will stay within specification limits if the drive
is operated in the other permissible orientations from which it was formatted.
Thus a drive formatted in a horizontal orientation will be able to run
vertically and vice versa.
The recommended mounting screw torque is 3 +/- 0.5 kgf.cm. The recommended mounting screw depth is 3.0 +/- 0.3 mm for bottom and 3.5 +/-
0.5 mm for horizontal mounting.
