Travelstar VP
Jumper settings |
Models: DDLA-21215, 21620 |
| |
|
Drive address
|
Jumper positions are available at the interface connector to determine the
drive address. Using cable selection, the drive address depends on the condition of pin 28
of the AT interface cable. In the case when pin 28 is ground or low, the drive
is a master. If pin 28 is open or high level, the drive is a slave. |
 |
|
Note: Pin 49 - When grounded, no spin-up at POR. When open/pull-up, normal spin-up
at POR. |
| |
|
|
|
