Mounting orientation |
The drive will operate in all axes (6
directions). The drive will operate within the specified error rates
when tilted +/-5 degrees from these positions. |
Performance and error rate will stay
within specification limits if the drive is operated in the other
permissible orientations from which it was formatted. Thus a drive
formatted in a horizontal orientation will be able to run vertically
and vice versa. |
The drive must be securely mounted in
the system to prevent motion or vibration during a seek operation or
spindle rotation using appropriate screws or equivalent mounting
hardware. |
 |
 |
 |
| The recommended mounting screw torque is
3 +/- 0.5 kgf.cm. The recommended mounting screw depth is 3.0 +/-
0.3 mm for bottom and 3.5 +/- 0.5 mm for horizontal mounting. |
| |
