Travelstar 6GN
Jumper settings |
Models: DBCA-203240, 204860 and 206480 |
A jumper is available at the interface
connector to determine the drive address. |
Using cable selection, the drive address
depends on the condition of pin 28 of the AT interface cable. In the
case when pin 28 is ground or low, the drive is a master. If pin 28
is open or high level, the drive is a slave.
|
 |
Shipping default settings |
The default setting of
jumper at shipment is No Jumper (Master). |
|
|
|
